Browse Community
Help
Log In
Solved!
Closed
TVeloso
1 Rookie
•
2 Posts
0
641
June 30th, 2023 08:00
"Connectivity to this host is lost. You must map using at least one port on each controller that is physically connected to each host."
Responses(1)
DELL-Charles R
Moderator
4.6K Posts
June 30th, 2023 12:00
Hello TVeloso,
Is this new configuration or was this working?
If it was working; Was there anything done on the system around the time this started? Any hardware or configuration changes?
Check over the deployment configuration and cable guide. Make sure all connections are correct:
Dell PowerVault ME5 Series Storage System Support Matrix
https://dell.to/3JFba9U
iSCSI network rules page 7
Dell PowerVault ME5 Series Storage System Deployment Guide
https://dell.to/3pyjSjB
Cable host servers to the storage system page 29-38
Dell Support Resources
View All
Top
DELL-Charles R
Moderator
•
4.6K Posts
0
June 30th, 2023 12:00
Hello TVeloso,
Is this new configuration or was this working?
If it was working; Was there anything done on the system around the time this started? Any hardware or configuration changes?
Check over the deployment configuration and cable guide. Make sure all connections are correct:
Dell PowerVault ME5 Series Storage System Support Matrix
https://dell.to/3JFba9U
iSCSI network rules page 7
Dell PowerVault ME5 Series Storage System Deployment Guide
https://dell.to/3pyjSjB
Cable host servers to the storage system page 29-38