Start a Conversation

Unsolved

R

1 Rookie

 • 

1 Message

24

October 14th, 2024 14:33

Problem after disk replacement MD3200i

Hello, I replaced 2 disks in an MD3200i storage, but one disk had the status failed and the other impeding failure
image

Firmware RAID: 07.75.14.61 (RAID 10)

Before replacing the disks, I selected the option replace phyisical disks, after it started to restructure the RAID again but after completion, the 2 disks were left with this error

image

Moderator

 • 

9.4K Posts

October 14th, 2024 18:54

Ravierf,

 

Based on what you are describing, my first thought is that you may have a puncture in the Virtual Disk. In order to verify what the specific cause is we would need some logs to review. What I would suggest is pulling a support bundle and upload it via the instructions found here.  I will private message you the sr# for you to use to upload them. Once received we can review them and see if the virtual disk is punctured or not. 

 

 

No Events found!

Top