Unsolved
1 Message
0
2298
January 13th, 2022 23:00
ME4024 snmp OID disk, volume, pool monitoring
Hi all,
I would like to monitor my Powervault 4024 with snmp on Centreon. I tried a snmpwalk, but there is only network OIDs, I did not find any OID about hard drive, pool, volume state etc...
Where can I find this OIDs ?
thx !
DiegoLopez
4 Operator
•
2.7K Posts
0
January 14th, 2022 08:00
Hello @Julien18,
Formanaging your ME4024 you need to use MDSM or PERCCLI. Here you have the documentation available about how to use the PowerEdge RAID Controller (PERC) Command Line Interface (CLI) utility to manage your RAID controller https://dell.to/3Kc3gUs
You have Other management interfaces explained in te Admin's Guide:
https://dell.to/3ntAwg9 Standard MIB-II behavior is the only one that mentions the OID.
Regards.