Unsolved
1 Rookie
•
6 Posts
0
84
December 16th, 2023 03:15
MD3200i unable to access Service Menu
Hi ,
I have a single controller and has some problems to assign ip address. I used serial connectio.
I could not access the service menu after entering Shift-S.
"Press within 5 seconds: <S> for Service Interface, <BREAK> for baud rate"
Anyone please help.
Thanks
David
No Events found!
DELL-Joey C
Moderator
•
3.9K Posts
0
December 18th, 2023 01:25
Hi,
Please confirm your putty parameters is correct:
Bits per second: 115200
Data bits: 8
Parity: none
Stop bits: 1
Flow control: none
Then, Press CTRL + Break at the same time. After then, press SHIFT + S at the same time to enter the Service menu.
davidCNY
1 Rookie
•
6 Posts
0
December 18th, 2023 03:03
@DELL-Joey C
Yes ... I have managed to access the service menu.
Thank you very much.
David
DELL-Joey C
Moderator
•
3.9K Posts
0
December 18th, 2023 03:38
Hi,
Thanks for coming back informing me.
It would be great if you can mark my reply as Solution, hence this would help others in the future for searching your post for answers.