Unsolved

1 Rookie

 • 

39 Posts

321

February 1st, 2021 02:00

MD3060e 8X4HH controllers

Hello,

I have a MD3060e with 2 controllers (8X4HH) however I can't get them seen in MDSM does it need to be daisy chained to another MD with standard controllers in?

 

regards,

Natalie

Moderator

 • 

7.9K Posts

February 1st, 2021 09:00

Hello ndn1992

Here is the link to the support matrix and if you look on page 11 it states the following:

“Management Tools Statement

When used as expansion for PowerVault MD3 dense arrays, management for the PowerVault MD3060e is provided by the MD Storage Manager (MDSM). Refer to the appropriate MD Series Storage Arrays Deployment Guide for information about MDSM.

 

In supported server direct attach environments, the PowerVault MD3060e is managed by management

software tools in the Operating System. The PowerVault MD3060e is not integrated with Dell OpenManage or the Dell Remote Access Controller (iDRAC) and may require changes to customer systems management methods. Refer to the MD3060e Deployment Guide for further information regarding Storage Enclosure Management Software.”

https://dell.to/3pGim9T

Top