Unsolved
1 Rookie
•
13 Posts
0
486
February 1st, 2023 21:00
PowerStore 3.2.0.1 System Bond
Hi everyone.
I know that after PowerStore OS 3.0 Update no longer require systembond cabling.
I have PowerStore 1000T and OS ver 3.2.0.1 and remove systembond cable, but occured system bond error.
Does anyone know why these symptoms appear?
No Events found!
ayas
Community Manager
•
7.2K Posts
0
May 16th, 2024 05:45
I just had same post at Japanese community.
Unfortunately, based on the KB below, which states that the fix is pending in the next version, it seems there is currently no way to mark it as unused. So, acknowledging the alert appears to be the only option for now.
Dell EMC Knowledge Article 000197305: PowerStore Alerts: Bond Ports Status and Fail-Safe Network State Alerts (Last updated on Dec 20, 2023)
https://www.dell.com/support/kbdoc/en-us/000197305/powerstore-alerts-bond-ports-status-and-fail-safe-network-state-alerts
Alert Text: All of the bond ports are down.
Error Code: 0x01807A03
Workaround:
If you are using an FC-only appliance (without file services and are not leveraging the system bond), you can ignore this alert.
The alert can be acknowledged - this fixes the issue temporarily, however, the issue may return following a node reboot. This issue is planned to be fixed in a future release.
There was internal notes indicating that the fix planned for PowerStore OE 3.5.x has been delayed.
I hope it help you ....
(edited)