Configuring Link Aggregation in PowerScale

Configuring Link Aggregation in Power Scale

Go to -WebUI Cluster management > Network configuration page.

IP address pools are allocated to external network interfaces.

More subnets are configured as either IPv4 or IPv6 subnets.

Click on the View/Edit  next to the  Pool under Actions and from the Pool Interface Members area you need to select the aggregated interface  form the available list.

Example (10gige-agg-1, 40gige-agg-1) as interface members of the pool

10gige-agg-1 = 10gige-1 + 10gige-2

40gige-agg-1 = 40gige-1 + 40gige-2

Aggregation Mode
1.Round-robin
2.Failover
3.LACP
4.FEC

Space or None is not an option under Aggregation Mode dropdown.

The default option is LACP.

Click on Save.