Unsolved
This post is more than 5 years old
1 Rookie
•
8 Posts
0
603
August 18th, 2009 06:00
upgrade powerpath for 3.0.4 to 5.3.0.3
I am running an IBM 7038-6m2 (p650) with AIX 5.2 connected to a new cx4-120 Clariion.
I have the following filesets loaded.
CLArrayS3 level 5.2.0.7
EMCpower.base 3.0.4.0
EMCpower.consistency_grp 3.0.4.0
EMCpower.multi_path 3.0.4.0
EMCpower.multi_path_clariion 3.0.4.0
NAVIAGENT 6.4.0.5
NAVICLI 6.4.0.5
I need to migrate the AIX 5.2 to AIX 6.1 and I was wanting to know the best way to update the PowerPath software to the latest version before the AIX migration.
The SAN is direct connected via 2 fibre card cards.
I have the following filesets loaded.
CLArrayS3 level 5.2.0.7
EMCpower.base 3.0.4.0
EMCpower.consistency_grp 3.0.4.0
EMCpower.multi_path 3.0.4.0
EMCpower.multi_path_clariion 3.0.4.0
NAVIAGENT 6.4.0.5
NAVICLI 6.4.0.5
I need to migrate the AIX 5.2 to AIX 6.1 and I was wanting to know the best way to update the PowerPath software to the latest version before the AIX migration.
The SAN is direct connected via 2 fibre card cards.
No Events found!
bigbird5
1 Rookie
•
8 Posts
0
August 18th, 2009 07:00
Conor
341 Posts
0
August 18th, 2009 07:00
1. Remove PowerPath
2. Upgrade AIX OS
3. Upgrade the ODM definiation on the host to latest version see Primus emc144935 - version that supports AIX6.1 is 5.3.0.3 available from ftp://ftp.emc.com/pub/elab/aix/ODM_DEFINITIONS/
4. Install PowerPath 5.3
Afterwards you should upgrade your Naviagent to one that is supported on the CX4.
Sound ok?
Conor
341 Posts
1
August 19th, 2009 02:00
SKT2
2 Intern
•
1.3K Posts
0
August 29th, 2009 04:00