Unsolved
This post is more than 5 years old
62 Posts
0
2600
August 18th, 2010 07:00
Uninstalling Powerpath
Hello All,
I have to uninstall PowerPath from a couple of hosts I am migrating. I will have 2 scenarios - a single host and clustered hosts.
I have found the KB article on how to uninstall PowerPath, but in other posts have also see recommendations of stopping one of the paths prior to uninstalling.
Can someone please shed some light on the best way to do this for my 2 scenarios?
Also, how can I 'stop' one of the paths in Powerpath? I only see an option for Standby which doesn't seem like the same thing - is my other valid option just to unplug one of the physical paths?
Thanks in advance!!!!!
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
August 18th, 2010 07:00
are you disconnecting from EMC storage or you are doing some kind of Powerpath upgrade ?
Darrell-uVlTI
62 Posts
0
August 18th, 2010 07:00
For these particular boxes they are being disconnected/migrated to different storage.
Darrell-uVlTI
62 Posts
0
August 18th, 2010 07:00
I think the concerns are with data integrity... The data will need to be intact to be migrated to the new storage.
Thanks again.
dynamox
9 Legend
•
20.4K Posts
0
August 18th, 2010 07:00
different storage vendor ? If that's the case, disconnect storage from the host and uninstall PowerPath. What are your concerns ?
dynamox
9 Legend
•
20.4K Posts
0
August 18th, 2010 08:00
so you have EMC storage attached to the server, you are getting ready to present another vendor storage and need to uninstall Powerpath before you install their failover software ? Just trying to understand what you are getting ready to do
Darrell-uVlTI
62 Posts
0
August 18th, 2010 08:00
Yes - but not install their multipathing software (yet).. I plan to have both storage systems attached to the hosts at the same time to get the data to the new storage.. so prior to connecting the new storage, I will uninstall PowerPath, but want to ensure integrity of the data...
Do you still think that unplugging one physical path and then uninstalling PowerPath is probably the best bet?
dynamox
9 Legend
•
20.4K Posts
1
August 18th, 2010 09:00
yes, you definitely want to have only one path to your storage before you uninstall PowerPath.
Darrell-uVlTI
62 Posts
0
August 18th, 2010 09:00
Thanks Babus - I did see that kb article earlier but didn't read the whole thing as it seemed like it only applied if the instructions from emc100126 didn't work (which this kb article did mention).
It seems as though the cluster section applies either way so that's great!
Nollaig1
1 Rookie
•
137 Posts
0
September 13th, 2010 06:00
Hello Darrell,
Just wondering if you had any further questions in regards this issue or has your query been answered?
Regards,
Nollaig
Nollaig1
1 Rookie
•
137 Posts
0
September 14th, 2010 07:00
Great, thank you Darrell.
Darrell-uVlTI
62 Posts
0
September 14th, 2010 07:00
Hello Nollaig - Yes it has been answered. Thank you!