PP 5.1.0 cannot see any devices

1. Can the OS see the devices? Can you paste up the output of ioscan -fnkC disk
2. Did you run powermt config

Thanks

CB

blazing fast SMTP servers here

beat me to it dynamox!

did you run ioscan and insf before your tried powermt config ?

Hi,

ioscan is OK, It seems server is running over path defined in lvm..
I have second server, same HW, same OS and there is all OK..
File powermt.custom is more smaller on wrong server.

so from ioscan -fnC disk ..you can see the HW path , but when you run powermt config and powermt display ..nothing displays ? Do you have inq or syminq on the box ?

Hi Oli,

Do you have any other path fail-over software configured?
Did you just install PowerPath? What version?

From the ioscan output are all paths (presume you want to see 4 paths?) displayed? Are all devices in a CLAIMED state?

Hey, you get an email saying there's new content on the forum ? Can I have that too ?

Hey, thanks !
Perhaps now I can beat Stefano for once

RRR,
For email notification on a particular forum, Goto "Thread List" and click on "Watch this Forum" --> now you will get emailed every time a thread is posted/updated...

Oli,
Would you mind running an EMC grab on this host and emailing me the output, buckley_conor__at__emc.com .... will update this thread with my findings also.

null

Hi CB,
I use only altenate links in lvm. syminq retrun all disk on symm side,
ioscan return all claimed disk. This evening I can restart server. It seems
problem is in driver in kernel. On second server has the same configuration
because its superdome devided in two partitions, The second one OK.
If restart doesn`t help I reinstall all PP sw... I have tried restart all commands from
emcpstartup in /etc, but it doesn`t help too..

best regards OLI

Rob .. you don't need to beat me .. I've reached the nirvana .. now I don't fight for poor points .. I'm just one step below God

No Rob .. Julie and Erich ..

Dynamox ?