Unsolved
This post is more than 5 years old
2 Intern
•
309 Posts
0
2746
November 15th, 2012 08:00
Powerpath/VE ERROR: Host not found
I have a few ESX servers that, according to the vSphere client, have Powerpath installed and the LUNs are owned by Powerpath When I try to query the server I get "ERROR: host not found" which of course is not true. What could be causing this error? Thanks.
# rpowermt check_registration host=hostname.domain.net
ERROR: Host not found
No Events found!
jespinoza1
52 Posts
1
November 15th, 2012 09:00
Hi! I suggest you open a Support case for this issue. I did a search in Support and found a similar case/error message: emc252291. The resolution was to open a port and then it worked.
DanPJ
2 Intern
•
309 Posts
0
November 15th, 2012 10:00
Ok, this isn't a firewall issue but I will open case. Thanks
hemachandra_s
28 Posts
1
November 16th, 2012 01:00
There could be multiple reasons. But as suggested please open a support ticket.
As per PowerPath/VE Installation guide
Reason for ERROR: Host not found.
A specified lockbox exists, and specified host is not present.
A supplied hostname or IP address cannot be reached,
or there is a TCP port conflict.
Addition to that I would recommend,
+ Recreate lockbox
+ Check for any Anti-virus or 3rd party product installed at this time that would interfere.
+ Run the command with ESX(i) host IP address.
+ Run the command from different RTOOLS/rpowermt server
Ashis_G
1 Message
0
November 30th, 2012 08:00
I had a similar issue. My RTOOLS server was on a linux VM. I had to unset the LD_LIBRARY_PATH and it started working.
NitramSnave
17 Posts
0
December 3rd, 2012 23:00
Hi Daniel,
Can you provide some further information about your environment
* Is this a HP system?
* What version of ESX are your running
* What version of VSphere and Plugin are you running?
Kind Regards,
Martin