This post is more than 5 years old
2 Intern
•
309 Posts
0
741
January 22nd, 2015 09:00
Change IP and Hostname on Red Hat Linux
Hello,
We are going to move two Linux boxes and a VNX5400 to a new datacenter. We need to change the IPs and Hostnames of the two servers. Do I need to do anything to Powerpath? I don't recall Powerpath caring about the hostname, just wanted to be sure.
Powerpath 5.6
Red Hat Linux 5.8
Thanks.
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
January 22nd, 2015 11:00
to VNX so you don't have to install navi agent.
dynamox
9 Legend
•
20.4K Posts
0
January 22nd, 2015 10:00
don't need to do anything with PowerPath (especially 5.6). Newer versions of PowerPath will auto-register the host name in-band. You don't have PowerPath configured to report to a central Powerpath management console ?
DanPJ
2 Intern
•
309 Posts
0
January 22nd, 2015 11:00
No management console yet. Auto-register the hostname in-band to what?
DanPJ
2 Intern
•
309 Posts
0
January 22nd, 2015 11:00
Excellent! We don't run naviagent.
I can save the step of reregistering the HBAs.
dynamox
9 Legend
•
20.4K Posts
0
January 22nd, 2015 11:00
i have had good luck with "net new" host registration, whether it will rename an existing host ..that i don't know