Unsolved
This post is more than 5 years old
4 Posts
0
535
February 19th, 2010 07:00
AIX-Symmetrix-DMX-PowerPath-Additional Paths
Hello,
I am seeing additional paths as given below: More than what is supposed to be expected.
Any one can give me suggestion as how to remove these additional paths:
fscsi3 is zoned only to FA Ports 10aa, 10ab. However, it is showing for 9aa, 9ba also... may be cabled might have been swapped by mistake and returned to normal... Am I correct.
fscsi2 is zoned to 9aa,9ba.
fscsi3 is zoned to 10aa, 10ab.
Any suggestions.
Pseudo name=hdiskpower118
Symmetrix ID=xxxxxxxxxxxxxx
Logical device ID=0051
state=alive; policy=SymmOpt; priority=0; queued-IOs=0
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
0 fscsi3 hdisk1026 FA 9bA active alive 0 0
0 fscsi3 hdisk1089 FA 10aA active alive 0 0
3 fscsi0 hdisk119 FA 7aA active alive 0 0
0 fscsi3 hdisk1261 FA 10aB active alive 0 0
3 fscsi0 hdisk174 FA 7aB active alive 0 0
1 fscsi1 hdisk244 FA 8aA active alive 0 0
1 fscsi1 hdisk309 FA 8bA active alive 0 0
2 fscsi2 hdisk607 FA 9aA active alive 0 0
2 fscsi2 hdisk672 FA 9bA active alive 0 0
0 fscsi3 hdisk969 FA 9aA active alive 0 0
Conor
341 Posts
0
February 19th, 2010 08:00
Everything is showing as active/alive so it looks like your issue may be due to zoning, check zoning for fscsi1 and fscsi2.