Unsolved
This post is more than 5 years old
1 Rookie
•
11 Posts
0
1332
February 10th, 2017 12:00
ScaleIO Manual installation
One of my customer would like to go for manual installation instead of Gateway install wizard.
Do EMC support manual installation in newer version?
I don’t see the steps in any of the new documents. If it is supported, Please guide me any reference document for manual installation of ScaleIO software in Linux OS
Reason:
They are not ready to enter the root password in open file for auto installation
They want to learn each steps required for installation which will help them in future troubleshooting.
No Events found!
RHasleton1
73 Posts
0
February 10th, 2017 13:00
It is supported, and it is in the manuals.
https://support.emc.com/docu82353_ScaleIO_Software_2.0.1.x_Documentation_set.zip?language=en_US&language=en_US
Check the v2.0.1.x Deployment Guide. Under the Reference section, there should be a chapter titled, Manual Deployment. You will find the steps there to manually install all the packages, the commands necessary to get the MDM cluster going (3 or 5-node), creating a protection domain, adding storage pools and adding SDSes along with their devices, along with creating and mapping volumes once the cluster is completely up and going.
Hope that helps