Unsolved
This post is more than 5 years old
3 Posts
0
496
June 16th, 2016 05:00
Is there a guide to add a new node as SDC only into an existed cluster?
I have installed a 3 nodes cluster with MDM/SDS/SDC on each node.
I want to install another SDC and add this SDC to the cluster. But I cannot find a guide from the installation guide.
Is this not expected? Or It is not supported?
No Events found!
pawelw1
306 Posts
0
June 16th, 2016 06:00
Hi,
Please see:
https://community.emc.com/thread/229673
Basically, you only need to install appropriate SDC package (RPM or MSI) and point it to the appropriate MDM IP addresses during the installation.
For example, on RedHat:
MDM_IP= rpm -i
Please refer to ScaleIO Deployment Guide, there are many examples of how to install and SDC.
Hope that helps!
Pawel