Unsolved
This post is more than 5 years old
18 Posts
0
6390
September 14th, 2016 12:00
PowerEdge 2950 III & ESXi 6
Just to let everyone know that I was able to install ESXi 6 on our 2950 III PowerEdge server successfully and I was also able to connect it to our MD3000i SAN without any issues. They are both running without any issues.
Yes, they are not on VMWare HCL, and they are at their EOL support but they still work great :emotion-2:
cheers
No Events found!
netasp
18 Posts
0
September 16th, 2016 12:00
It was a new install...
DELL-Josh Cr
Moderator
•
9.2K Posts
0
September 16th, 2016 12:00
Thanks for providing the information, was it a new install or an upgrade?
_MarcAntony_
4 Posts
0
April 9th, 2019 11:00
ESXi 6.5 Update 2 also works on the 2950 III, but not version 6.7. It seems version 6.5 is the end of the line.
VollToll
1 Rookie
•
5 Posts
0
April 6th, 2022 11:00
FYI, also installed ESXi 6.5 U3 on 2950 III with Intel Xeon CPU E5450
used this image:
Donxack
1 Message
0
May 3rd, 2022 16:00
It is not possible to find the download link, could you help me locate it or send it to me?
DELL-Young E
Moderator
•
5.2K Posts
0
May 3rd, 2022 21:00
Hi, your server is way too outdated it won't support ESXi I think. Should you still decided to go ahead and look for one, here's the link
https://dell.to/3KKTh7o and I'm thinking you should look for another model like R640 since your isn't supported.
Also as of now
VMware-VMvisor-Installer-6.5.0.update03-18071574.x86_64-DellEMC_Customized-A08.iso -> this can't be found but you can find
"This is DellEMC Customized Image of VMware ESXi 6.5 U3"
"Dell Version: A09, Build# 19092475"