This post is more than 5 years old
2 Posts
0
822
March 30th, 2017 07:00
Issue in booting Windows 2008 R2 after installing Hyper V in Power Edge R220
Hello,
I have added Hyper V role in windows 2008 R2 SP1 running on Power Edge R220, after normal reboot the windows is extremely slow, it takes 20 mins to pop up the logon screen.
I found problem in the BIOS setting, when i turned off the CPU virtualization the system works normally as expected but when i turn on the virtualization option with hyper V installed the issue repeats.
Now I desperately need to run hyper V on windows 2008 R2 with this machine! any solution?
You valuable suggestion and support would be life saver
No Events found!
theflash1932
9 Legend
•
16.3K Posts
1
March 30th, 2017 08:00
Have you updated the iDRAC/LCC and BIOS, system firmware (NIC, RAID, etc.), and drivers? OS up to date? All play a role in Hyper-V running properly.
What else is this server running?
Moind
2 Posts
0
April 2nd, 2017 07:00
Thank You!,
Updating iDRAC/LCC, BIOS, system firmware and OS drivers finally resolved the issue!