How to stop idrac from responding to ping

Hi, I was thinking about it and how to do that. And thinking like reversing in this article https://dell.to/48stJcz

• To stop the iDRAC from answering ping requests that are faster than its network speed, you can use a dedicated network interface for the iDRAC and turn off the auto-negotiation option. Then, you can set the network speed to either 10 Mbps or 100 Mbps.
• To separate the iDRAC from the host operating system and stop them from pinging each other, you can use a shared network port and assign different VLANs (virtual local area networks) to the iDRAC and the OS.
• Also I found this thread which it can be helpful https://dell.to/3Rm99EC To turn off the ping response on a Linux operating system, you can change the value of the /proc/sys/net/ipv4/icmp_echo_ignore_all file to 1. To turn it back on, change the value to 0.
• To disable the ping response on a Windows Server operating system, you can adjust the firewall settings and turn off the rules for file and printer sharing (echo request: ICMPv4 in) and (echo request: ICMPv6 in).