Start a Conversation

Unsolved

C

3 Posts

789

January 10th, 2022 13:00

Debian Buster on PowerEdge R350

Just taken delivery of a new PowerEdge R350 with 2 * 2TB SATA Disks.

We have previously used the PowerEdge R340 and Debian Buster with no issues, however when ordering we were told that the R340 is no longer available.

So we configured a RAID 1 array and created a Virtual Disk.

When booting from USB to install Debian, we choose the 'Install' option (not Graphical Install).  We get to choose language, setup network etc., but when we get to configuring which disk we install to, we only see the USB Flash Drive listed.  We don't see the Virtual Disk we created.

Any ideas?

Moderator

 • 

3.8K Posts

January 11th, 2022 06:00

Hello,

unfortunately Debian is not supported on Poweredge systems. If you don't see Virtual Disk is because the OS didn't recognize the PERC controller, you have to install manually driver, but we don't have drivers for Debian OS.

Thanks

Marco

No Events found!

Top