1 Rookie
•
1 Message
0
111
October 18th, 2024 20:14
Problems with a disk - Ready not On line.
Currently I have a Dell R940 server, with a disk in raid 0 of 225GB in which I have the OS of the server, I have taken a 4TB NVMe disk from another DELL Server and I have tried to install it, however at the moment of doing it the disk remains in Ready state and does not change to Online, I have already updated firmware to BIOS, Controller, and I can not solve the problem.
Inside iDrac you can see the disk, but if I enter the BIOS by F2 at the time of initializing the computer the controller does not detect the disk.
The model of the disk is SSDPE2KX040T8T
how can I change the status of the new disk and create a new raid?
No Events found!
DELL-Young E
Moderator
•
5.1K Posts
0
October 21st, 2024 00:35
Hello can you see page 9?
https://dell.to/4fuGDJN
Maximum internal storage ● Up to 184.32TB using 24x2.5 -inch 7.68TB SAS/SATA/SSD/NVMe (Up to 12 per CPU) + 12x2.5 -inch NVMe PCIe SSD's available.
Origin3k
4 Operator
•
2.2K Posts
0
October 19th, 2024 07:03
Your R940 have U.2 slots? You cant insert a NVMe on a SAS/SATA only backplane.