Unsolved
1 Rookie
•
1 Message
0
123
November 13th, 2024 03:11
New Storage (SSD) cannot detect in R630 Server
I Installed 4 SSD in the server, but only 1 detect
what can I do so all this drive can be read?
Sorry, I newbie from this
No Events found!
Unsolved
1 Rookie
•
1 Message
0
123
November 13th, 2024 03:11
I Installed 4 SSD in the server, but only 1 detect
what can I do so all this drive can be read?
Sorry, I newbie from this
Top
Origin3k
4 Operator
•
2.2K Posts
0
November 13th, 2024 08:23
It looks like that your PowerEdge Server is equiped with a PERC Raid controller. If so you need to create a Diskgroup(Raid Level) and placing a VD(Virtual Disk)on. This is one step... but it needs to be done once and within your PERC otherwise the OS will not see anything. So you need to reboot the system and configure it. Maye a iDRAC 8Gen can it also so.... a 9Gen iDRAC for sure.
Within a PERC a Disk can be set to RAID or Non-RAID.
I assume that you see within your Windows the RAID1? of the 2 existing SSDs?
Regards,
Joerg
DELL-Young E
Moderator
•
5.1K Posts
0
November 14th, 2024 06:55
Hello, I'm wondering RAID 5 may have been roped into configuration somehow on the configuration wizard. For now you can check VD and PD status/configuration through idrac. You can share the snapshots if you like.