1 Rookie
•
3 Posts
0
29
February 25th, 2025 22:17
ID PE26350 failed disks
Hello,
Old PE2650 that works great + PERC3 + 2 raid1 + hot spare
The disks on the PE2650 front panel are labelled 0-5, with different blink rates and colors
Looks like I got two bad disks.
The hot spare I guess was in slot 3 - both leds are dark - which I'm guessing I can hot swap and the raid will find and use it.
Is the other disk slot 1 on the top left? It's bottom LED is blinking fast amber and the top one dark.
I struck out finding the docs explaining what the lights mean and mapping to the megarc printout.
The GUI to make it easy stopped working after a rhel update years ago
I struck out finding the docs explaining what the lights mean and mapping to the megarc printout.
The GUI to make it easy stopped working after a rhel update years ago
Can you ID the two slots with the bad disks? Thanks
Good
Logical Drive : 1( Adapter: 0 ): Status: OPTIMAL
---------------------------------------------------
SpanDepth :01 RaidLevel: 1 RdAhead : Adaptive Cache: DirectIo
StripSz :064KB Stripes : 2 WrPolicy: WriteBack
Logical Drive 1 : SpanLevel_0 Disks
Chnl Target StartBlock Blocks Physical Target Status
---- ------ ---------- ------ ----------------------
0 02 0x00000000 0x0887c000 ONLINE
0 01 0x00000000 0x0887c000 ONLINE
HotSpare Disk at Channel No. 0 and ID No. 3
Bad
Logical Drive : 1( Adapter: 0 ): Status: DEGRADED
---------------------------------------------------
SpanDepth :01 RaidLevel: 1 RdAhead : Adaptive Cache: DirectIo
StripSz :064KB Stripes : 2 WrPolicy: WriteBack
Logical Drive 1 : SpanLevel_0 Disks
Chnl Target StartBlock Blocks Physical Target Status
---- ------ ---------- ------ ----------------------
1 03 0x00000000 0x0887c000 ONLINE
0 01 0x00000000 0x0887c000 FAILED
No Events found!
DELL-Young E
Moderator
•
5.1K Posts
0
February 26th, 2025 03:15
Hello, https://dell.to/4bk03Qn
from the image from this link
https://dell.to/4heItyV
You should be able to find out the ID and let us know.
stevenestrada
1 Rookie
•
3 Posts
0
March 27th, 2025 02:15
I got it.
# megarc -physSetHsp pd[1:2] -a0
Changed hotspare state of physical drive 2 on channel 1 to on
All fixed. I'm good.
Thanks
stevenestrada
1 Rookie
•
3 Posts
0
March 27th, 2025 01:21
Thanks, The raids are fixed
Whats the trick to assign a hot spare?
This disk:
# megarc -phys -ch1 -id2 -a0
Adapter 0, Channel 1, Target ID 2 ----------------------------------------
Type: DISK Vendor : MAXTOR
Product: ATLAS10K5_73SCA Revision : JNZ6
Synchronous : Yes Wide-32 : No Wide-16: Yes
LinkCmdSupport: Yes TagQ support: Yes RelAddr: No
Removable : No SoftReset : No AENC : No
# megarc -physSetHsp pd[c1:t2] -a0
Error: Bad Physical Drive format
Error in parsing
# megarc -physSetHsp -a0 pd[c1:t2]
Error: Bad Physical Drive format
Error in parsing
DELL-Young E
Moderator
•
5.1K Posts
0
March 27th, 2025 02:00
Hello, could you please check out here? Direct Messaging | DELL Technologies