Unsolved
1 Rookie
•
1 Message
0
155
November 1st, 2024 08:15
Dell PowerEdge R640 10-Bay NVMe and NVMe SSD Samsung PM1733 2.5"
Hello,
I want to configure software RAID from S140 Perc Controller with Samsung NVMe SSD PM1733 2.5 drives.
But in S140 configuration utility the drives not found: "no physical disks currently detected".
In RAID controller S140 User's Guide I have seen that my drives in supported NVMe drives list.
My SSD NVMe drive is Samsung SSD PM1733 PN: MZWLJ1T9HBJR-00AAZ.
How can I solve this problem and configure software RAID with my drives.
No Events found!
DELL-Erman O
Moderator
•
2.8K Posts
0
November 1st, 2024 13:16
Hello,
Is the Samsung SSD PM173 a Dell part? There is a Dell P/N number on it, can you share it? Disks without Dell firmware may not be recognized by the system. I mentioned it here before, please take a look at this topic too. Poweredge R640 and NVMe drives 2.5 | DELL Technologies
Hope that helps!