Unsolved
1 Rookie
•
1 Message
0
49
May 4th, 2025 08:38
The system board BP0 PG voltage is out side of range in My Dell Poweredge R940
I have dell poweredge R940 xa, till yesterdy everything is fine and suddely i am facing issuse with below error
"The system board BP0 PG voltage is out side of range"
I can't even start the server and also i can't access the idrac as of now.
Can you please help me on this case.
No Events found!
DELL-Marco B
Moderator
•
3.8K Posts
0
May 5th, 2025 08:13
Hello,
to solve this issue you have to update CPLD to version 1.0.5 directly from iDRAC.
PowerEdge R940 CPLD Version 1.0.5 | Driver Details | Dell US
Thanks
DELL-Rey G
3 Apprentice
•
1K Posts
0
May 6th, 2025 14:41
@DELL-Marco B reminder, updating the CPLD requires the system to power on, and in this case, the customer's system doesnt boot.
#Iwork4dell
DELL-Rey G
3 Apprentice
•
1K Posts
0
May 6th, 2025 14:43
@Tunyazar your only option is to remove as many parts as possible to take the system to a minimum config to see if it will power on. If it still doesnt power on, the system board is probably dead.
Rey
#Iwork4Dell