1 Rookie
•
2 Posts
1
52
June 22nd, 2025 14:06
PowerEdge T420 - Compatible graphics Card
Hi,
I have a newly acquired PowerEdge T420 Server.
What would the most compatible graphics card to use for hosting CAD applications.
Regards
No Events found!
1 Rookie
•
2 Posts
1
52
June 22nd, 2025 14:06
Hi,
I have a newly acquired PowerEdge T420 Server.
What would the most compatible graphics card to use for hosting CAD applications.
Regards
Top
DELL-Young E
Moderator
•
5.2K Posts
1
June 23rd, 2025 03:11
Hello, I found some old discussion here.
https://www.dell.com/community/en/conversations/poweredge-hardware-general/t420-graphics-support/647f2a49f4ccf8a8def18f77?msockid=1a5e8444c37364fc023690acc29e65bd
And
https://i.dell.com/sites/content/shared-content/data-sheets/en/Documents/dell-poweredge-t420-technical-guide.pdf#:~:text=The%20T420%20supports%20internal%20graphics%20processing%20units%20%28GPUs%29,medical%20imaging.%20See%20the%20Processor%20section%20for%20details.
I don't know much about CAD. Unless a community member or two knowledgeable chips in with what they know, I say it's best that you check some CAD user guide on what GPUs are recommended and cross-check with Dell's documents.
Respectfully,
tonschk
2 Intern
•
187 Posts
0
June 23rd, 2025 10:36
I am not sure if this can help you, I am using this T420 server with an nVidia RTX3060 12GB and for gaming at very high top notch resolutions work amazingly well
Kays
1 Rookie
•
1 Message
0
August 21st, 2025 14:15
@tonschk
Thanks for your input, I want to do the same did you have to do a special config on the BIOS to have the 3060 Card work without glitches ?