Unsolved
1 Rookie
•
1 Message
0
22
March 8th, 2025 13:04
Need Help in Dell Poweredge FC630 Blades
I have dell poweredge fc630 installed where I have an access of two blades. I would like to share the configuration of both servers where I found two esxi servers installed. In One server CPU utilization is 5% out of 100% (Total CPU is 14.4 GHz while its usage is 756 MHz while in second server 2% out of 100% (Total CPU is 14.4 GHz while its usage is 308 MHz. I have mentioned all the virtual machines in each esxi server. I also have mentioned the assigned CPUs , Memory & Storage. I am getting complains that the VMs are slow You are requested to please guide me. I am pasting all the details of esxi servers.
No Events found!
DELL-Young E
Moderator
•
5.3K Posts
0
March 9th, 2025 23:37
Hello, thanks for choosing Dell. I regret to tell you this type of performance issue isn’t supported by tech support. But I hope the link below helps you in any way.
https://dl.dell.com/manuals/all-products/esuprt_solutions_int/esuprt_solutions_int_solutions_resources/high-computing-solution-resources_white-papers6_en-us.pdf
BIOS tuning for HPC on 13th Generation Haswell servers
Respectfully,
DELL-Rey G
3 Apprentice
•
1.1K Posts
0
March 10th, 2025 20:15
My suggestion is to look at the CPU usage for each VM, then access the OS for each VM and determine which applications are using the most CPU. Windows has the Task Manager application, and Linux has the Top utility to tell you what is using the most resources. Its possible that what you are running on these VMs just requires that amount of resources.
Rey
#Iwork4Dell