Start a Conversation

Solved!

Go to Solution

1 Rookie

 • 

4 Posts

150

April 4th, 2025 20:49

How do I remove UEFI boot order entries on PowerEdge R750 server?

I know how to disable boot devices in the UEFI boot sequence section of the BIOS, but the documentation doesn't address removing entries.
Is it possible?
If so, where is it dealt with?

Moderator

 • 

4.4K Posts

April 7th, 2025 20:39

Hello,

 

I didn't think you could delete an entry but it looks like this may work:

 

Enter the UEFI boot manager

Boot to <F11> = UEFI Boot Manager

     UEFI Boot menu

         Delete Boot Option: Deletes an existing boot option.

 

Page 70-71

https://dl.dell.com/content/manual10126488-lifecycle-controller-user-s-guide.pdf?language=en-us

Moderator

 • 

5.1K Posts

April 7th, 2025 00:18

Hello, thanks for choosing Dell and welcome to our community.

https://www.dell.com/support/manuals/en-ai/poweredge-r750/per750_bios_pub_ism/system-bios?guid=guid-cf672af3-f0e7-4b34-9ccc-304720ffa838&lang=en-us


You can choose from UEFI Boot Settings.

 

Option

Description

UEFI Boot Sequence

Enables you to change the boot device order.

Boot Options Enable/Disable

Enables you to select the enabled or disabled boot devices

1 Rookie

 • 

4 Posts

April 7th, 2025 19:47

Aloha,

As outlined in my original post, I know how to disable the entries.
I wish to permanently  *remove* the entries.

Regards,

Grant

1 Rookie

 • 

4 Posts

April 7th, 2025 21:44

Aloha, Charles R

Thank you!

I committed the all too frequent mistake of not scrolling down far enough in the menu.

That option is there and works.

One caution:

In my case there were more than 13 entries and deleting more that two at a time seemed to cause a problem.

It locked up the menu and I had to perform a hard reboot.

Regards,

-ggathagan4a11af

No Events found!

Top