Unsolved
1 Rookie
•
1 Message
0
34
November 29th, 2024 19:03
Dell PowerEdge T40 EmC Ram upgrade 64g
I am trying to install 64 GB of ram. I am using 4 sticks of Crucial 16GB DDR4 3200 udimm ram. I can add 3 and everything works fine. When I try adding the 4th, the system just blinks an amber light on and off, no post beeps at all. I have moved the memory around. they always work unless I place it in the last slot. That slot would be if looking at the computer from the front. The first black slot one down from the white. If looking from the back it would be the 2nd black slot after the white slot. Anyone have any ideas?
No Events found!
DELL-Young E
Moderator
•
5.2K Posts
0
December 2nd, 2024 01:21
Hello thanks for choosing Dell and welcome to our community.
This is the guideline you can follow.
https://dell.to/41gKhmr
At this point, I’m suspecting it’s the slot that may have the issue.
If you want a second opinion or ask for a replacement, you can raise an official ticket through
https://dell.to/418fZSU