1 Rookie
•
2 Posts
0
64
March 13th, 2025 12:54
Dell Poweredge T110 ii
Dell poweredge T110 ii not starting up, Indicator keeps changing after every restart and they are 1,3 or 1,2,3, or 1,2,3,4
No Events found!
1 Rookie
•
2 Posts
0
64
March 13th, 2025 12:54
Dell poweredge T110 ii not starting up, Indicator keeps changing after every restart and they are 1,3 or 1,2,3, or 1,2,3,4
Top
DELL-Chris H
Moderator
•
9.4K Posts
0
March 13th, 2025 18:47
Wunpini,
The 1,3 is pointing to a memory configuration error, the 1,2,3 is referring to generally an issue with the optical drive/hard drive/motherboard. There isn't a 1,2,3,4 code, so I assume that is light bleeding over to another, so if that is the case you have 1,2,3, if it is 2,3,4 it would be a USB failure. Youc an find these code definitions on page 17-18 here.
As far as troubleshooting the issue, what I would suggest is to take the server to its Minimum to Post configuration. Minimum to Post for the T110 II is removing everything internally and externally from the server but the following;
Once you have done that then power the server back on and see if the server completes Post, if so then power back down and individually reinstall all the removed devices until the issue reappears, identifying the device causing the issue. If you are able to reinstall all the devices and the server still posts then it was likely due to a poor connection on something that removing and reinstalling corrected.
Let me know what you see, and if this helps.
(edited)