1 Rookie

 • 

2 Posts

146

February 14th, 2025 06:10

Compatibility check

inno3d geforce rtx 3060 twin x2 3xdp hdmi qddr6 12gb graphics card supported on dell emc r740

Moderator

 • 

2.9K Posts

February 14th, 2025 10:29

Hello,

Unfortunately, officially it's not supported. Because of GeForce RTX series belong to consumer group not enterprise group. So it means it is not tested by on enterprise servers. I can tell R740 supports Nvidia A2, Nvidia A10, Nvidia A16, A30, A40, A100, A800 

 

Other than I can share with this article 

GPU or ACLR card installation guidelines

  • Ensure that both the processors are installed.
  • The processor must use a GPU kit low-profile heat sink module.
  • To ensure adequate cooling when one or more GPUs are installed, the ambient inlet temperature is restricted to 30°C for CPU 150 W/8 C, 165 W/12 C, 200 W, 205 W. For more information, see the PowerEdge Manuals section.
  • Ensure that the GPU enablement kit is available.

    The GPU enablement kit includes:

    • GPU air shroud
    • Mylar
    • Riser 3A or 3B
    • GPU cable for riser 3A or 3B
    • GPU cable for riser 2A or 2E
    • Riser 2A or 2E
    • Riser 1A or 1D
    • GPU cable for riser 1A or 1D
    • Two 1U processor and heat sink modules and two CPU clips
    • Six high performance cooling fans
  • All GPUs must be of the same type and model.
  • You can install up to three double-wide or six single-wide GPUs.
  • The filler bracket on the GPU air shroud must be removed before installing the GPU.
  • Ensure that high-performance fans, and GPU air shroud are installed.
NOTE: When using systems with GPU, ensure that you install PSUs with 1100 W or higher, and set the PSU configuration to non-redundant mode.
NOTE:Generally, any GPU that is greater than 75 W requires a power cable. GPUs with 75 W or less does not require a power cable.
 
Hope that helps!

1 Rookie

 • 

2 Posts

February 19th, 2025 09:21

@DELL-Erman O​ Thanks for the Information. It helped me a lot.

Moderator

 • 

2.9K Posts

February 20th, 2025 07:24

Great to hear that, thanks for your feedback. If your issue is resolved, it would be great if you could mark the topic as an Accepted Answer and others could benefit from it. Thanks!

No Events found!

Top