Question for power requirement of PowerEdge R740

Heya.

 

Thanks, yes, it's a good one Hope you have a good one too.

 

I'm not an electrician and I can just check the specs that we have here, but I would say you're good to go.

Check the specs here:
https://dell.to/3tN5Pnr

 

 

PSU	Class	Heat dissipation (maximum)	Frequency	Voltage	High line 200v240 V	Low line 100– 140 V	DC	Current
750 W AC	Platinum	2891 BTU/hr	50/60 Hz	100–240 V AC, autoranging	750 W	750 W	NA	10 A–5 A

 

You might also take a look into the manual:

https://dell.to/3rF6SnN

 

 

BR
Stefan

Stefan, 

First of all, thank you for your reply.

I've already searched the datasheet and I couldn't confirm it. That's why the question was posted on the community site.

I believe this site has an obligation to provide information to customers.

Could you please give me accurate information about phase?

While Dell PDU's support the use of 3 phase power, I don't believe the servers support it directly. If you give me the part number for the power supplies I can check to be certain if they do or not.

 

 

 

Let me know.

 

 

 

 

Chris,

Thank you for your reply.

Power supply information is shown in the figure below.

 

Best regards,

 

Those are the specs of the power supply, do you know the part # that is listed on it?

 

Also, if it is the power supply that came with the unit, you can Private Message the svc tag and I can verify that way as well.

 

 

I have plan to purchase PowerEdge R740. That's why i don't know part #.

I would like to purchase R740 with the aforementioned power supply. Please let me know the availability of 120VAC 3-Phase power. The purchase will be decided by information you provided.

 

Best regards,

Hello,

I was able to find that there was Dell Power Distribution Units 3-phase support, but I could not access such information to confirm this on the server specific. Just a note caught my attention at the link below: "NOTE: This system is also designed to connect to the IT power systems with a phase to phase voltage not exceeding 240 V."
https://dell.to/3pmkH9f

 

I don't want to share any wrong information. It may be helpful to get more accurate information by contacting sales.