Unsolved
This post is more than 5 years old
18 Posts
0
3091
January 18th, 2018 08:00
OMIVV 4.1 Connection Profile Error
OMIVV v4.1.0.1599
I created a connection profile and added hosts to it. When I run the "test selected connection profile", 4 out of the 18 hosts show an "Fail - Unsupported System" error under the iDrac column. I first had 6 hosts erroring out like this, but I went and updated the iDrac firmware (idrac7/8) to 2.50.50.50. When I reran the test, two host errors went away, but I still have these four left. They are all 13g R930 boxes. I have other R930's that work fine with this test, just these four error out.
No Events found!
DELL-Josh Cr
Moderator
•
9.2K Posts
0
January 18th, 2018 09:00
Hi,
Are you able to access the iDRAC GUI? Resetting the iDRAC may also help.
SeanDonaghey
18 Posts
0
January 18th, 2018 12:00
Yes, I can login to the gui just fine. That is how I updated the firmware to 2.50.50.50. I ssh'd to the idrac's and ran racadm racreset. I came back about an hour or some later and re-ran the test connection profile and get the same error "Failed - Unsupported System"
DELL-Josh Cr
Moderator
•
9.2K Posts
0
January 18th, 2018 13:00
Can you try deleting those servers from the profile and adding them again?
SeanDonaghey
18 Posts
0
January 19th, 2018 05:00
I deleted the connection profile and recreated it with all the hosts it had and I still get the same error on 4 of the hosts "Failed - Unsupported System"
Kavyashree_R
29 Posts
0
June 10th, 2018 21:00
Hi,
Make sure, servers are running on latest iDRAC firmware.
Delete connection profile from OMIVV, restart management agents in ESXi. Then create connection profile and perform test connection for the same.
Latest version of OMIVV ( i.e., OMIVV 4.2 ) is available.
Thanks,
Kavyashree R