Unsolved
This post is more than 5 years old
6 Posts
0
110631
August 14th, 2015 12:00
OMIVV 3.0 inventory failed for host
Used OMIVV 3.0 to deploy a M620 host - worked fine and host was added to vCenter - now when running inventory against this host, I get the error "Inventory Failed" in vCenter - The Conenction Profile test passes for both iDRAC and host creds
Any suggestions?
No Events found!
ianb_65
8 Posts
0
September 13th, 2015 23:00
If you look in the log in the vcenter Management Center does it say "inventory failed for host . IDRAC IP address is not usable" ?
I am getting that on a T430. The other 4 from same batch worked fine. DRAC shows as Enterprise, and my test connection works fine too.
Cheers
Ian
SeanDonaghey
18 Posts
0
January 21st, 2016 08:00
Was this ever resolved? I am now experiencing the same error on 3 systems (R810 and R820).
SeanDonaghey
18 Posts
0
January 28th, 2016 07:00
Once again. Is there a resolution to this problem. I have an R810 and R820 experiencing the same problem.
jfWCCH
15 Posts
0
February 3rd, 2016 12:00
having similar on r620's.. noted om/vm was on same host, as one failing to connect to.. tried moving it and didn't want to talk to that host either but after a restart of the om vm.. was still only original host that it still refuses to talk to..
tried moving the omivv vm to a different nic/subnet then the nic idrac is using (only have express) - still same..
f/w is latest on all.. idrac configs are same, logins same, idrac gui works on host in question..
jfWCCH
15 Posts
0
February 8th, 2016 09:00
finally got my 620's all working...
after complete reinstall, re-register.. had to manually build folder structure for the web plugin to work.
got 2 hosts up.. third one was no not even passing connection test.. put in maint mode, rebooted, made sure csior was on in LC, when came back up, ran connection test and it passed idrac & host, claimed license, now all 3 of my hosts are up.. spent a lot more hours trying to get this to work then would have expected...