This post is more than 5 years old
3 Posts
0
47085
July 20th, 2015 05:00
OMIVV 3.0 & Dell R630 Bare Metal Deployment Error: Apply ISO Failed, Exception Occurred *servicetag*
Hi,
We are trying to use OMIVV on a new deployment of Dell R630 servers with dual SD card deploying ESXi 6.
After deployment is run the server restarts but does not boot the ISO, iDRAC IP is in a different network to OMIVV but there is no restriction on communications between the iDRAC network and the OMIVV box.
Looking at the firewall no attempt is made to connect to the file share from iDRAC network, but there is a small amount of comms to the OMIVV box.
No traffic is being blocked.
This just doesnt seem to function properly at all and the information on why a failure occurred is non existent!
Is anyone else seeing these issues?
Thanks
No Events found!
DELL-Bhima R
38 Posts
0
July 26th, 2015 22:00
Please make sure that OMIVV eth0 network IP address is reachable to iDRAC network IP address and try deploying Hypervisor.
DELL-Bhima R
38 Posts
0
July 21st, 2015 05:00
Can you check the boot order of the server
In the boot order Drive C: should appear as first
qwayvy
3 Posts
0
July 24th, 2015 04:00
Hi,
Thanks for the reply, both the bios and the hardware profile are set to boot to c: first. But the problem remains the same. This doesn't appear to be the issue, are there any deeper logs I can check for issues?
Thanks,
Gareth
qwayvy
3 Posts
0
August 5th, 2015 14:00
I moved the network in the same network as the iDrac cards and this worked fine. Thanks for your help!