Unsolved
This post is more than 5 years old
3 Posts
0
27841
June 24th, 2014 05:00
workstation monitoring through OMCI
I am trying to monitor the workstations using OMCI as per the documents specified and able to poll some values through snmp using isome mib browser tools. I suspect whether I can get the change status of all states which I am able to poll, Like say consider systemstatechassisintrusionstatuscombined from 10892 mib for which I am getting status ok. But eventhough I physically remove the chassis cover there was no change in the state. so how to judge that whatever the states I can read are really hardware supported.
Thanks in advance
Sainath
No Events found!
Dell - Sharmad
52 Posts
0
July 1st, 2014 11:00
Thanks Sainath for getting it to notice
However we would like the following information.
1. What version of OMCI are you using? Please check if the issue is reproduced with OMCI v8.2.1.
2. Please provide the system/workstation details and What is the version of BIOS used? I hope the latest BIOS is flashed on the system.
3. Please help check if the event log is able to display the event on chassis intrusion. If the SNMP service is not configured appropriately then traps may not appear.
4. Does you system/workstation have chassis intrusion detector (Yes/No)?