Unsolved
This post is more than 5 years old
2 Posts
0
270
February 21st, 2017 15:00
Upgrading PE 2850 from Win2008 std sp2 to Win2008 std R2
Unable to upgrade PE 2850 from Win2008 std sp2 to Win2008 std R2. Upgrade would not continue because an updated driver for SCSI Perc 4e/di is required.
The current driver installed on the system is already on the latest version:
Firmware Version 5B2D
Driver Version 6.50.3.64
Any suggestions?
No Events found!
chyko
2 Posts
0
February 23rd, 2017 13:00
This driver is only for post-R2 OS versions, so it could not work on the win2008 std sp2 version.