Unsolved
This post is more than 5 years old
2 Posts
0
628
October 14th, 2016 16:00
Server T620 OS installation issues BCRAID3.SYS on Blue screen
Hi recently the Motherboard for the server was replaced, and we were able to recover the data but The OS system was not working properly, and we decided to just reinstall the WINDOWS SERVER SMALL BUSINESS 2011, we update the firmware, Bios, Driver pack and all that to the lastest ones, after all that was done we did the raid configuration to proceed with the windows installation, but when windows is loading up the drivers during the installation, it just crash into a blue screen making reference to this file BCRAID3.SYS, and just crash there without luck to continue, any help will be greatly appreciated, thanks
No Events found!
StrongCompSolut
2 Posts
0
October 14th, 2016 19:00
How can I load the driver manually, the problem is that dont even ask me to do a browse or anything like that, it just go into that blue screen, the other thing I notice when I went to deply the OS from the Life Cycle Controller the windows server 2011 small business was not listed there, only 2008, 2008 R2, 2012, 2012 R2, not sure if that has to do with that.
Daniel My
10 Elder
•
6.2K Posts
0
October 14th, 2016 19:00
Hello
bcraid3.sys appears to be related to the S100/S300 PERC driver. I would suggest that you go to the download page for the server and download the driver for the OS you are installing. You should be able to manually load the driver during OS installation.
Thanks