Unsolved
This post is more than 5 years old
1 Message
0
318
October 10th, 2016 02:00
R710 with H700 RAID Card
We have a R710 with the H700 RAID card. RAID card is seeing a foreign config. From what I've been told, no one was working on the server so no drives should have been added.
Since I'm remote, an onsite contact is being dispatched and will be asked to check that the RAID card is seated properly and drive cables are tight.
My question is assuming nothing changed, will the RAID card read the configuration off the drives?
No Events found!