Unsolved
This post is more than 5 years old
2 Posts
0
498
January 13th, 2017 07:00
PowerEdge R620 Slow Connection
I have an R620 with Broadcom Network cards in it. I have installed Hyper V on it and all the connections to are very slow. I have read that it is due to the network cards. I have disabled the virtual machine queues on all adapters and the performance is still slow. Can someone please help with this. I was unaware of this and now the server is in production and all traffic is slow.
No Events found!
Daniel My
10 Elder
•
6.2K Posts
0
January 13th, 2017 10:00
Hello
This is not an appropriate query for the OOW forum. Troubleshooting a network performance issue on your virtual machines would require review of your VM, host, and switch network configuration. This does not fall into the realm of answering simple questions. If you would like assistance from us in troubleshooting this issue then you will need to pay for fee-based support.
The only suggestion I can give without review of your configuration and the performance across the network is to make sure all drivers and firmware are up-to-date. You should also review your configuration to make sure it has been set up properly.
Thanks