Unsolved
This post is more than 5 years old
6 Posts
0
1495
July 26th, 2017 07:00
PowerEdge R310 not recognizing network ports.
PowerEdge R310 not recognizing Network ports on the server. Ports show active but, not recognized by OS. Is there a service not started? Is the OS or Hardware?
No Events found!
jhtedder
6 Posts
0
July 27th, 2017 09:00
Embedded NIC's are enabled through the Set-up Screen. What is the next thought? Also, has QLogic NIC Drivers replaced Broadcom that are currently installed?
jhtedder
6 Posts
0
July 27th, 2017 12:00
Here is the information on our NIC's: they are Broadcom BCM5716C NetXtreme II GigE, Both ports are on board NIC's.
jhtedder
6 Posts
0
July 27th, 2017 12:00
Here is the description of the NIC ports within the PowerEdge Server: Broadcom BCM5716C NetXtreme II GigE. The NIC's are on-board ports.
jhtedder
6 Posts
0
July 31st, 2017 12:00
Robert, Any further thoughts?
jhtedder
6 Posts
0
July 31st, 2017 15:00
Qlogic drivers did not work. It tells me that the devices are not working properly because Windows cannot load the drivers required for this device. (Code 31)