Unsolved
This post is more than 5 years old
4 Posts
0
501
July 29th, 2016 18:00
Power Edge R610 Software Upgrade and Broadcom BCM5709C NIC's
Hi _Guys,
I have a pair of R610's which is running Windows 2008. I have upgraded the disks on one of the boxes and and the OS to 2012 R2 and therefore lost the NIC teaming I require. Can you point me in the correct direction to a Broadcom Advance Control Suite so that I can configure the BCM5709C NICs with 2012 R2 as an OS?
Thank you,
Charlie
No Events found!
Daniel My
10 Elder
•
6.2K Posts
0
July 30th, 2016 11:00
Hello
The Qlogic Control Suite is part of the driver installation package:
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=MVXGT
Thanks
CBPyle
4 Posts
0
July 31st, 2016 14:00
Hi Daniel,
The Qlogic Control Suite gets me to a line editor. This presupposes i know what i'm doing... which is not the case. I have seen a Broadcom Advanced Control Suite which will allow me to graphically guess correctly as I attempt to configure the system. Is access available to the software?
Thank you,
Charlie
Daniel My
10 Elder
•
6.2K Posts
0
July 31st, 2016 16:00
The link I provided includes the interface you are talking about.
Thanks
CBPyle
4 Posts
0
August 1st, 2016 11:00
Good Morning Daniel,
What I've been able to find loaded on the server is BACScli not the BACS4. Have I made a mistake in loading the software?
Charlie
CBPyle
4 Posts
0
August 1st, 2016 18:00
Hi Daniel,
I was able to find the BACS4 interface in Network_Driver_T12H_WN32_17.0.1_A00 (1).EXE
On installing, it let me run BACS4 whcih let me easily team my Broadcom NICS.
Thank you for your help. I think this ticket/effort can be closed.
Charlie