Unsolved
This post is more than 5 years old
7 Posts
0
4258
November 15th, 2016 04:00
OMSA - "Not a certified drive" in Alert logs
Replaced (2) drives in PE T420, but OMSA/Alert logs reporting drives as "Controller event log: PD 00(e0xff/s0) is not a certified drive: Controller 0 (PERC H710 Adapter)".
No Events found!
rocc21
7 Posts
0
November 16th, 2016 18:00
Original Drive:
Seagate
Capacity: 278.88GB
Negotiated/Capable Speed: 6.00Gbps
New Drive:
Seagate
Capacity: 278.88GB
Negotiated/Capable Speed: 6.00Gbps
rocc21
7 Posts
0
November 16th, 2016 18:00
Both Arrays are reporting healthy after we replaced the drives in which were reporting predictive failure, but each of the new drives have a yellow triangle next to them and reporting "non-critical" as status instead of reporting OK.
rocc21
7 Posts
0
November 18th, 2016 15:00
Robert - Did you have any recommendation here? Thanks!
rocc21
7 Posts
0
November 29th, 2016 08:00
The HD's are Seagate (same manufacture as failed drives). As for firmware on the drives, where should we obtain this specifically? Thanks!
rocc21
7 Posts
0
November 29th, 2016 10:00
They are Dell Branded:
Here is the link for the drives we purchased:
www.cdw.com/.../4219340.aspx
rocc21
7 Posts
0
November 30th, 2016 09:00
Thanks for the update. We will check with customer on next maintenance window to perform update.