Unsolved
This post is more than 5 years old
1 Rookie
•
4 Posts
0
1719
January 9th, 2017 09:00
idrac failed to initialize
under f2 ,idrac settings it says SWC00700:Idrac is not ready. The configuration values cannot be accessed. Can you give any suggestions to fix this? or at least disable it so that the server boots without stopping at the push F1/F2 due to Idrac failure?
No Events found!
gwski
1 Rookie
•
4 Posts
0
January 9th, 2017 09:00
I powered off the server, held the power button for 20 seconds. Also help down the blue I button on the front for 20 seconds (with power applied). every time I boot I get the same error. I see posts about resetting the idrac from the web page, but I the idrac cant ping, the Ethernet port for it never links. is there a physical way to reset the idrac? the server is running esxi 5.1
gwski
1 Rookie
•
4 Posts
0
January 10th, 2017 11:00
R720, does dell sell a replacement board?