Unsolved
This post is more than 5 years old
1 Message
0
298
February 16th, 2017 13:00
Added RAM to T110 II Server and now stays in Power Save Mode
We went from 8G to 16G of RAM. Now the server will not boot up all the way, and it flashes "Power Save Mode" in a box on screen and then the monitor goes blank. It looks like the server is still on, but we can't get it to boot up all the way.
- Martha
No Events found!
Daniel My
10 Elder
•
6.2K Posts
0
February 16th, 2017 15:00
Hello
The memory you have installed is either incompatible, faulty, or is in an invalid configuration. There are many possibilities and troubleshooting this issue would go beyond the purpose of this forum. If you need someone to review your configuration and troubleshoot the memory issue then you will need to pay for fee-based support. You can review the memory population rules in the system manual:
www.dell.com/support/home/product-support/product/poweredge-t110-2/manuals
Thanks