Unsolved
1 Rookie
•
25 Posts
0
2500
April 17th, 2023 12:00
Zone conflict on Brocade switch
Zone conflict error while connecting new HPE Module brocade switch to SAN brocade switch.
The switch1 is our current brocade switch
The switch 2 is new switch and have no zoning\zonecfg. We have ISLed both the switches. The domain Ids are unique. Still i see "zone conflict" on the ISL port. The switch is not merging with the fabric.
No Events found!
DELL-Joey C
Moderator
•
3.9K Posts
0
April 17th, 2023 20:00
Hi @Prasad0065,
Would you mind letting us know the models of the switches are involved? Do you have a screenshot of the stated issue with zone conflict?
DELL-Charles R
Moderator
•
4.4K Posts
0
April 18th, 2023 05:00
Hello Prasad0065,
I think this should help:
Article Number: 000028673
Connectrix B-Series: How to clear the zoning config and then add a switch to a Brocade fabric
https://dell.to/3mMvU7B
Prasad0065
1 Rookie
•
25 Posts
0
April 18th, 2023 05:00
Hello Joey,
The SAN brocade switch is "Brocade X6-4" and the smaller brocade switches are from HPE C7000 Enclosures.
When i do a switchshow on the switch, i just basically see the below on the port.
17 17 061100 id N16 Online FC E-Port segmented,xx:xx:xx:xx:xx:xx:xx (zone conflict)
Prasad0065
1 Rookie
•
25 Posts
0
April 18th, 2023 06:00
Hello Charles,
I have already tried this. Still, both the ports show segmented and "zone conflict". The switch is still showing as principal and remains on its own fabric.
DELL-Erman O
Moderator
•
2.8K Posts
0
April 18th, 2023 07:00
Hi, I found a thread from here please take a look. How to Resolve a Zone Conflict Between Two Switches - Data Storage (https://dell.to/3GSRq1q)