1 Rookie
•
2 Posts
0
57
February 1st, 2025 08:58
Z9100-on basic config
I have a used Z9100-on and 8 x 100gb mellanox connectx-4 network cards to play around with, and I have newbie question.
I would like to configure the switch as a basic switch I have configured the management interface with a IP, but I would like to get the web interface working can somebody give me a basic config I can adapt. I can see there is a vlan 1 but I cant set up the vlan with an IP address.
No Events found!
DELL-Joey C
Moderator
•
3.9K Posts
0
February 3rd, 2025 09:46
Hi,
Before you can SSH, you will need to create user admin and password by using serial connection. The step details are mentioned in page 43 to 46.
DELL-Joey C
Moderator
•
3.9K Posts
0
February 3rd, 2025 07:45
Hi,
Z9100-ON OS9 do not have any web interface management. The switch's configuration are all done via CLI.
Here's the switch OS9 configuration guide: https://dell.to/42z5ed3
moored@analyst.com.au
1 Rookie
•
2 Posts
0
February 3rd, 2025 08:37
@DELL-Joey C Thanks for the response, that will make it harder but moving on I have enabled ssh on the switch, I am trying to login via ssh to the switch what password is used I tried the enable password but did not work. I tried ssh root@192.168.150.7
I tried the Dell tag as the password that didn't work either
any help would be appreciated.