Unsolved
1 Rookie
•
35 Posts
0
791
June 19th, 2023 06:00
VLANs are overwritten from entryType 1 to 1 - LOG message - N2000 Series
Hello
I just setup a new N2000 switch (latest firmware installed). Port 48 is the uplink trunk. Port 40 is a trunk port to a network interface with multiple VLANs. I get the messages below in the logs:
INFO MAC_MOVE: Mac 68:05:CA:29:D9:3E in VLAN: 3047 is overwritten from entryType 1 to 1 and port Gi1/0/48 to Gi1/0/40
INFO MAC_MOVE: Mac 68:05:CA:29:D9:3E in VLAN: 3592 is overwritten from entryType 1 to 1 and port Gi1/0/48 to Gi1/0/40
INFO MAC_MOVE: Mac 68:05:CA:29:D9:3E in VLAN: 3046 is overwritten from entryType 1 to 1 and port Gi1/0/48 to Gi1/0/40
INFO MAC_MOVE: Mac 68:05:CA:29:D9:3E in VLAN: 3594 is overwritten from entryType 1 to 1 and port Gi1/0/48 to Gi1/0/40
INFO MAC_MOVE: Mac 68:05:CA:29:D9:3E in VLAN: 3041 is overwritten from entryType 1 to 1 and port Gi1/0/48 to Gi1/0/40
INFO MAC_MOVE: Mac 68:05:CA:29:D9:3E in VLAN: 3060 is overwritten from entryType 1 to 1 and port Gi1/0/48 to Gi1/0/40
Could someone, please explain the log message I get above? It probably has to do with the fact that ports 40 and 48 are both trunk links that allow the same untagged VLANs through but I don't understand why the switch is telling me this.
Thank you for your help.
DELL-Charles R
Moderator
•
4.4K Posts
0
June 19th, 2023 11:00
Hello igano,
I have seen an internal article that says these messages can be prevented by using a logging level of Level 4 (Warnings).
Can you try changing you logging level and check results?
Can you confirm you are on the latest Dell EMC Networking N2000 Series Firmware Version 6.7.1.21 (28 Mar 2023)
https://dell.to/3qGsaGf
Please note we are unable to assist directly in making initial installation/configurations, but we do have professional services which can help you to deploy the configuration you need. You may consider contacting Dell Sales department for a professional deployment contract if needed. I hope the resources I am able to supply will be helpful for you.
igano
1 Rookie
•
35 Posts
0
June 19th, 2023 12:00
Hello Charles
I can confirm, the switch has the latest firmware - 6.7.1.21. The logging level is already at 4, however I don't see the message anymore. Strange. If anyone knows what this message was about, please let me know. Just curious.
Thank you again.
Thank you