Switch Z9264-ON Support NIC Server 4x100GbE ?

Hi, I found this sheet dell-emc-networking-z9264-on-spec-sheet.pdf (https://dell.to/3tnsueU) and I can understand the Dell PowerSwitch Z9264F-ON does support a Server NIC using 4x100GbE. This switch is a high-performance, high-density open networking 100GbE multi-rate aggregation switch. It provides up to 64 ports of 40/100GbE in QSFP28 form factor or up to 128 ports of 10/25/50GbE (via breakout). The multi-rate 100GbE ports support 10/25/40/50/100GbE. So, if your Server NIC uses 4x100GbE, it should be compatible with this switch. However, for the specific configuration and setup, you may need to contact Dell’s sales team.

@Dell-ErmanO​ Does the Dell Z9264F-ON switch support if 1 server uses 1 NIC with 25GbE and 1 NIC with 100GbE ?

After reviewing the spec sheet I think it should be able to support a server that uses one NIC with 25gbe and other NIC with 100gbe, as long as the ports are configured properly. But we don't give configuration support it is a whole different area so I suggest let see our community help or you can reach the deployment team via your local support and get exact information. I don't want to mislead you on it.