Unsolved
1 Rookie
•
2 Posts
0
221
September 13th, 2024 10:25
Stacking two Dell s5248-ON and its configuration
any one please helpout
Stacking two Dell s5248-ON and its configuration
No Events found!
Unsolved
1 Rookie
•
2 Posts
0
221
September 13th, 2024 10:25
any one please helpout
Stacking two Dell s5248-ON and its configuration
Top
thejohnwatson
1 Rookie
•
4 Posts
0
September 21st, 2024 07:15
Hey!
To stack two Dell S5248-ON switches, you'll need to ensure that both switches are running compatible firmware versions and are properly connected using the designated stacking ports. First, connect the switches using the QSFP28 ports designed for stacking, and ensure you use the correct cables. Then, configure stacking through the command-line interface (CLI) by assigning a stack ID and priority to each switch.
This setup will allow the switches to function as a single logical unit. Make sure to save the configuration on both switches and reboot if needed for the changes to take effect.