Unsolved
4 Posts
0
390
October 17th, 2023 16:19
Stack 2x 4148T-ON Switches
I have 2 switches and am running out of ports on one of them. If I understand correctly there is a way to connect 2 switches to expand the number of available ports. I have tried searching to see how this is accomplished however there is a lot of contradicting or confusing information out there (OS versions/availability).
I have set the switches up on port profile 3 and have the interconnect cable connected between port 25 on both switches (cli shows an active 100G connection). I am at a loss as to what to do next.
Can anyone please confirm if what I want to do is possible or do I just trunk the 100G interconnect and then just config the switches as separate entities?
Thank you.
No Events found!
DELL-Charles R
Moderator
•
4.5K Posts
0
October 17th, 2023 20:48
Hello Brad,
See if VLT will do what you want.
Note: Switch stacking is not supported in OS10.
Virtual Link Trunking aggregates two identical physical switches to form a single logical extended switch. This single logical entity ensures high availability and high resilience for all its connected access, core switches, and clients.
https://dell.to/401KPd7